||Top Clamp Plate
||A part of platens in injection mold. During injection molding, the mold core and mold cavity will be mounted to the mold base, which is then fixed to the platens inside the injection molding machine. It refers to a large plate onto which a mold half is mounted. A larger machine typically has larger platen dimensions and can therefore accommodate a larger mold. Top clamp plate is located on the stationary side of the press, it provides a means to attach the locating ring to the mold base.
||Sprue puller/sprue lock pin
||To "pull" the material from the sprue bushing at the end of the injection molding cycle. The location of the sprue puller pin is directly below the sprue bushing, it is retained via the ejector retainer and ejector plates and passes through the support and retainer plates.
||The front half of the injection mold, mounted to a stationary platen and aligns with the nozzle of the injection unit. they typically have holes for Ejector Pins.
||The rear half of the injection mold, mounted to a movable platen, which slides along the tie bars. It provides the negative image of the desired part that will appear on rear side of the mold above the parting line when injection molding. The cavity steels contains the gate, and usually a small portion of the runner system.
||Guide pillar/Guide pin/leader pin
||Align both halves of the injection mold at the Parting Line. It always aligns with the guide bushing to ensure the position of mold cavity and mold core, keep better precision during injection molding.
||To bond the mold cavity and mold core for injection molding.
||Hot runner temperature control junction box
||To keep the temperature and heating contorl for hot runner during injection molding.
||Bottom clamp plate
||A part of platens in injection mold, silimar function as top clamp palte.